Jinan United Perfect Building Materials Corporation
Jinan United Perfect Building Materials Corporation
Gold Verified Supplier
1Yr
Verified Business License Business License
Main Products: Aluminum foil composite, Roofing & Walling Waterproofing materials, fiberglass fabric/ tissue, Insulation & Acoustic materials
Home > Blog > QC Checklist for Synthetic Underlayment Before Shipment

Contact Us

Mr. Du
Sales Director
Chat Now

Your inquiry content must be between 10 to 5000 characters

Please enter Your valid email address

Please enter a correct verification code.

QC Checklist for Synthetic Underlayment Before Shipment

A buyer in North America once received a shipment in which the lengths on the packing list were correct and the rolls at the centre of the pallet were short. The underlayment shipment quality had been signed off against the pallet count rather than against the individual rolls.

An underlayment qc checklist exists to catch the differences that appear between a reference sample and a production run, and those differences are usually small, local and invisible to a pallet count. A synthetic underlayment inspection covers the material, the dimensions, the roll build and the packing, and each of those has its own check. This article sets out a checklist that a buyer can use and a supplier can work to.

1. Material Checks in an Underlayment QC Checklist

The material checks in an underlayment qc checklist confirm that the sheet matches the grade that was ordered rather than the grade that was easiest to produce.

The first check is the construction. The carrier, the coating and the surface treatment together define the product, and each should match the specification. A woven carrier that has been replaced with a non-woven one changes the tear behaviour even where the weight is the same.

CheckWhat It Confirms
Carrier typeWoven or non-woven as specified
Coating presenceApplied to the specified face
Surface treatmentTexture or print as specified
Weight per squareMatches the grade
ColourMatches the reference

The weight is the second check and the easiest to perform. A sample cut to a known area and weighed gives the weight per square, and a value that differs from the reference indicates that a layer has changed.

The third check is the mechanical figure. The tensile strength and the tear resistance should be tested against the reference, and the test should be performed on the same basis as the reference so that the two are comparable. A tensile figure measured on a dry sample and compared against a reference measured after conditioning is not a comparison, and the same applies to a tear test performed with a different specimen width.

2. Synthetic Underlayment Inspection of Dimensions

A synthetic underlayment inspection of dimensions confirms the width, the length and the thickness, and each of those affects what the buyer can do with the roll.

The width is measured across the roll at several points, because a width that varies along the length produces a coverage that varies with it. The width should be checked against the tolerance rather than against a nominal figure.

DimensionCheck
WidthAcross the roll at intervals
LengthBy roll, against the order
ThicknessAt several points across the web
SquarenessThe cut end against the edge

The length is checked by roll rather than by pallet. A pallet count that matches the order can hide short rolls in the middle of the stack, and the short rolls are the ones that run out before the course is finished.

The thickness should be measured at several points across the web as well as along the length. A thickness that varies across the web produces a roll that winds unevenly and a sheet that behaves differently across its width.

3. Roll Build and Underlayment Shipment Quality

Roll build is the part of underlayment shipment quality that is most often left out of a checklist, and it is the part that the buyer notices first.

The roll diameter should be checked against the order. A diameter that varies across a shipment packs badly and does not fit the pallet pattern, and the variation is visible before the rolls are unwrapped.

ItemCheck
Roll diameterAgainst the ordered figure
Roll hardnessConsistent across the shipment
Core typeAs specified
Core positionCentred, not crushed
Wind qualityNo wrinkles or telescope

The hardness should be consistent across the shipment. A roll that is soft beside a roll that is firm indicates a tension that varied during the run, and the soft rolls are the ones that flatten in transit.

The core should be checked for type, diameter and position. A core that is off centre produces a roll that does not roll straight, and a core that is crushed indicates that the roll was dropped rather than wound correctly.

4. Underlayment Shipment Quality Packing and Labelling Checks

Packing and labelling are the last checks before the shipment leaves, and they are the ones that connect the product to the paperwork.

The packing should protect the roll and present the identity. A wrap that is torn or loose allows the roll to move in the pallet, and a label that is missing leaves the buyer without a batch reference.

ItemCheck
Wrap conditionIntact, tight, no tears
LabelPresent, legible, correct
Batch codeMatches the certificate
Pallet patternStable, consistent
Pallet conditionDry and sound

The batch code on the label should match the batch code on the certificate. A mismatch means that the roll cannot be traced to the production record, and the retained sample becomes unusable as a reference for that roll.

The pallet should be dry before loading. A wet pallet introduces moisture at the bottom of a stack, where it is least visible and where the rolls sit against it for the whole voyage.

5. Case Notes on a Synthetic Underlayment Inspection

A buyer in North America received a shipment where the lengths on the packing list matched and the rolls at the centre of the pallet were short. The inspection had been performed against the pallet count rather than by roll, and the short rolls had passed. Measuring every roll before the shipment left would have caught them.

A second shipment arrived with rolls of two different diameters mixed on the same pallet, which did not fit the container pattern and moved in transit. The rolls had been wound to two diameters because the length had been changed mid-order without a corresponding change to the diameter. The diameter was added to the checklist as a figure confirmed per roll rather than per order.

Both cases show the same point. The defects that reach a buyer are the ones that the checklist did not cover, and a check performed at the wrong level misses them.

6. Running an Underlayment QC Checklist in Practice

Running an underlayment qc checklist in practice means fixing the level at which each check is performed and the record that it produces.

The material and the dimensions are checked on a sample from the run, and the sample is retained against the batch. Those checks describe the production and not the individual roll.

The roll build is checked on every roll, because the figures that matter to the buyer, the diameter and the hardness, vary roll by roll rather than run by run.

The packing and the labelling are checked at the pallet, and the record connects the pallet to the batch. That record is what allows a buyer to receive the delivery into its own system and to compare a later roll against the reference. A record kept as a shipment total alone is not enough for that purpose, because the shipment total does not identify which batch produced which roll on the pallet. The record should therefore be kept per roll against the batch code that appears on the label.

7. Synthetic Underlayment Inspection Records for a Buyer

A buyer should request the figures that are checked per roll as well as the figures that describe the run.

Request the width, the length and the roll diameter for each roll, in a form that can be compared against the order. A summary figure that covers the whole shipment hides the individual variation.

Request a retained sample by production batch, held against the reference used at approval. The retained sample is what makes a later comparison possible.

Request the certificate and the packing list to carry the same batch codes as the labels on the rolls. A delivery whose paperwork does not match its labels costs the buyer time to reconcile and undermines the traceability of the whole shipment.

8. Synthetic Underlayment Inspection Supplier Profile

United Perfect Building Materials, part of Jinan United Perfect Building Materials Corporation, produces synthetic roofing underlayment and applies an underlayment qc checklist to every production batch. The company checks the construction, the weight, the tensile strength, the tear resistance, the width, the length, the roll diameter and the roll hardness, and records the figures against the batch.

Jinan United Perfect Building Materials holds a retained sample by production batch, so a delivered roll can be compared against the reference used at approval. Buyers can request the synthetic underlayment inspection figures per roll and the underlayment shipment quality record for a consignment before it leaves the plant. United Perfect can also confirm the core type and the roll diameter in writing where the rolls will be stacked in a container.

9. FAQ About Underlayment QC Before Shipment

9.1 What should be checked before a shipment leaves?

The checks divide into four groups. The material checks confirm the construction, the weight and the mechanical figures against the reference, and the dimension checks confirm the width, the length and the thickness. The roll build checks confirm the diameter, the hardness and the core on every roll, while the packing checks confirm the wrap, the label, the batch code and the condition of the pallet. An underlayment qc checklist that covers those four groups covers the defects that reach a buyer.

9.2 Why check every roll rather than a sample?

Because the figures that vary roll by roll are the ones a buyer notices first. A sample from the run describes the production and not the individual roll, and the roll diameter, the hardness and the core can differ between rolls of the same run. A pallet count that matches the order can hide a short roll in the middle of the stack. The figures that describe the run can be checked on a sample, and the figures that describe the roll should be checked on every roll.

9.3 How are width and length verified?

The width is measured across the roll at several points along its length, because a width that varies along the length produces a coverage that varies with it, and it is compared against the tolerance rather than against a nominal figure. The length is verified by roll rather than by pallet, because a pallet count that matches the order can still conceal a short roll. Both figures should be recorded per roll so that a buyer can compare the delivery against the order.

9.4 What does roll hardness indicate?

It indicates the tension that was applied as the roll was wound, and a variation across a shipment indicates a tension that was not held constant. A roll that is too soft flattens or telescopes in transit, and a roll that is too hard carries built-in strain that can appear as a wrinkle or an edge curl on installation. A consistent hardness across a shipment is a sign that the winding was controlled, and it is one of the reasons the underlayment shipment quality is judged across the whole consignment rather than on a single roll.

9.5 Why match batch codes across the paperwork?

Because the batch code is what connects a roll to its production record and to the retained sample. Where the code on the label, the certificate and the packing list agree, a buyer can trace a roll back to the figures that were recorded when it was made, and the retained sample can be used as the reference for a later comparison. Where the codes disagree, that link is broken, and the buyer has to resolve the mismatch before the delivery can be received into its own system.

Share

Contact Us

Send Inquiry to Us
* Message
0/5000

Want the best price? Post an RFQ now!

Recommended Products